Backdrop decoration with aluminum punch panel in Malaysia

On May 30th, Miss Vivian, sent us an inquiry about aluminum punched panels for the decoration of backdrop. After several days of communication, we made consensus and sent two sets of samples with two different colors to Malaysia for quality check and installation.

 

As the building is not finished, the actual size should be confirmed before moving forward, which took almost a month.

 

On September 13th, production drawing was confirmed. Mass production began. The products were loaded on October 5th.

Project preview

Overall Introduction

Location: Malaysia

Area: roughly 173 square meters.

Thickness of the panels: 2.5mm

Surface treatment: PVDF spraying

Color: RAL 7040

Installation Method: seam installation

Corner bracket: countersink

Rib reinforcement: Not required

Details

Sample Confirmation

aluminum perforated panel sample for client

Installation Method Confirmation

aluminum cladding installation Method Confirmation

Difficulty of the Project

Solution 1: Black glue: after installation, the overall effect is not satisfactory as shown below. This solution is not selected.

after installation of panel

Solution 2: aluminum trim: too many angles among the panels, will be too difficult to cut and install onsite. Abandoned.

Final solution: using wood trim to caulk. This solution is suggested by Vivian and the effect is satisfactory.

Why seam installation instead of seamless splicing installation?

As there are lights behind the aluminum punched panels, if using seamless splicing installation, the maintenance of lamps will be inconvenient and also cost too much labor and money. At the same time, as the wall of backdrop is not finished, considering that there will be tolerance, seamless installation will not be suitable.

However, if use seam installation, the problems above will not be problems.

Drawing Revision

Original Drawing:

Original Drawing

Size:24440*6000mm

Revised Drawing:

Revised Drawing

Size:24440*4500mm

Production Drawing Confirmation

Production Drawing Confirmation

Mass Production

Punching:

Punching process

Bending:

Aluminum plate bending process

Welding:

Welding process

Grinding:

Conner Grinding

Corner Bracket:

Corner Bracket

Polishing:

Aluminum plate Surface Polishing

PVDF Spraying:

PVDF Spraying process
PVDF Spraying 2

Delivery

Loading

At Alumideas , our products are widely used for exterior and interior in architecture and building, shopping mall, hospital, metro station, railway station etc. For multifunctional advantage like ventilation, decoration, partition, excellent in lights transmission and so on.

 

If any requirement for Aluminum decorative panel please contact us ! We will offer the best quote and service !

Share:

Recent Posts

Suspended Ceiling Project

Basic Information of Project Application: Suspended ceiling Project Location: Quanzhou City, China Year of Completion: 2024 Area: 600 sq.m Fabricator: Foshan Alumideas Co., Ltd More

Three-dimensional structure cladding project

The office building, which is situated in Moka, Mauritius, is composed of 1,180 aluminum panels, with a total area of 2,655 square meters. The length and width of the aluminum panel are both 1.5 meters. Coated with PVDF Kynar 500 in silver color, the 2.5mm corrugated panels decorate the office building with their distinctive aesthetic appearance.

Send Us A Message

Copyright © Foshan Alumideas Co.,Ltd. All Rights Reserved.

Check Out the Full Catalog

Quick Info Exchange Helps Us Serve You Better

Alumideas Catalog

Ask For A Quick Quote

Get an instant quote from our professional consultants.

We will contact you within 1 working day, please pay attention to the email with the suffix “@alumideas.com”

Get
《The most popular aluminum cladding facade design in 2024》 For FREE

the most popular aluminum cladding facade design in 2024 pdf

Just leave your email and get this PDF right now !