Aluminum honeycomb panel is a new type of environmentally friendly decorative material. Compared with other curtain wall materials, aluminum honeycomb panels have better thermal insulation and sound insulation performance.
Mga Sertipikasyon
.ISO 9001:2015 | Sertipiko ng SGS | Kritikal sa Mga Pag inspeksyon sa Kalidad
The coating used on the surface of the aluminum honeycomb panel of the curtain wall is a one-time pre-rolled PVDF coating, which can effectively control the color difference and flatness of the surface paint of the aluminum plate, and successfully eliminate the problem of coarse particles in the traditional spraying process, and the color is uniform, delicate, soft and bright. The main component of PVDF coating contains no less than 70% of fluorocarbon resin of Kynar500 or Hylar5000. It is a kind of durable combined coating with the most stable molecular structure. Products coated with PVDF coating can resist ultraviolet radiation in sunlight for a long time, industrial waste gas, Acid rain and chemical erosion can keep the color stable and smooth for a long time, and the coating does not peel, crack, or chalk.
Aluminum honeycomb wall cladding
Honeycomb panel curtain wall
Honeycomb column wrapped
Imitation stone honeycomb panel
Aluminum honeycomb panels are easy to disassemble and assemble without damaging the panels.Because of its light weight and convenient transportation, it can be transported to different places for multiple reuse
Aluminum honeycomb panels are coated with epoxy-fluorocarbon and have strong corrosion resistance.Salt spray 48 hours without pinhole, crack, no corrosion.
Aluminum honeycomb curtain wall panel can effectively solve the noise problem of aluminum veneer and aluminum plastic board in rainy weather, and the noise can reach 20-30dB for 100-3200Hz sound source.
The thermal conductivity is only 0.0424 / m.K, energy absorption capacity is 150-3500kJ/M,It is a very great thermal insulation material.
1. Spread out the aluminum honeycomb in advance and cold-press to level it. Duration: higit pa sa 4 mga oras, pressure: 10-25 tons.
2. Prepare glue: the mixing ratio of the main agent and curing agent is: main agent 4, curing agent 1.
3. Raise the press to a suitable height and hang the safety bolt.
4. Lay the bottom plate on the gluing workbench for uniform gluing. (The table should be kept as clean as possible during the process. If there is glue attached to the decorative surface of the aluminum plate, wipe it up in time.)
5. Place the glued aluminum plate in the center on the press table, or on the special cold-pressed mobile tray.
6. Place the spread-open aluminum honeycomb on top of the glued aluminum plate and place it in the center. Ensure that the aluminum honeycomb is bigger than the aluminum plate as much as possible.
7. Repeat the 5 steps for the panel, and then flip it over the aluminum honeycomb.
8. Repeat steps 4, 5, 6, at 7 in a loop, and try to ensure that the aluminum plates are aligned perpendicular to the ground during the stacking process.
9. Cold pressing: try not to exceed 40 honeycomb panels per cold pressing. Cold pressing time: 4-5 mga oras (room temperature above 15 degrees), 6-8 mga oras (room temperature below 15 degrees), pressure: 15-25 tons.
Para makatipid ka ng oras, inihanda din namin ang mga bersyon ng PDF ng lahat ng mga catalog ng produkto, iwan mo lang ang email mo at makukuha mo agad ang download link.
Aluminum panels: Mainly selected high quality 3003H24 alloy aluminum sheet or 5052AH14 high manganese alloy aluminum sheet as the base material, fluorocarboin rolll-coated sheet with thickiness of the 0.7-1.5mm.
Aluminum Sheet: Base sheet thickness is 0.5-1.0mm
Aluminum honeycomb: Honeycomb core material using hexagonal 3003H18 type aluminum honeycamb core, with aluminum foil thickness is 0.04-0.07, edge length is 5-6mm.
Adhesive: Two-component of polymer epoxy film and two-component of modified epoxy resin.
In order to prove that aluminum plastic plate used for curtain wall is reliable and safe, it is necessary to carry out a large number of tests on the coating thickness of aluminum composite panel, penetration resistance,cut strength and the ability to bear wind load. Alumideas has been extensively tested and passed by these projects.
| Ang kapal | 20 | 25mm | |||
| Front al-planking | 1.00mm | ||||
| Back al-planking | 1.00mm | ||||
| Weight (kg/m) | 7.4 | 7.8 | |||
| Mechanical properties of composite panels and surface panels | |||||
| Moment of inertia |(cm⁴/m) | 19.85 | 31.67 | |||
| Section modulus W(cm³/m) | 19 | 24 | |||
| Composite panel stiffness (KN cm²/m) | 139000 | 2217000 | |||
| Aluminum alloy of surface panels | AA 5754A(ALMg3) | ||||
| Elastic modulus (N/mm²) | 70000 | ||||
| Tensile strength of surface panels (N/mm²) | Rm≥220 | ||||
| 0.2% yield stress (N/mm²) | Rp0.2≥130 | ||||
| Elongation (EN485-2:1994) | A50≥8 | ||||
| Profile Linear Thermal Expansion | 2.4mm/m When the temperature _discrepancy is 100C | ||||
| Surface finish PVDF spray paint | |||||
| Gloss(initial value) | 30-40% | ||||
| Pencil hardness | HB-F | ||||
| Honeycomb core | |||||
| Size of honeycomb | 1/4″(6.3mm) | ||||
| Weight capacity | About 80kg/m³ | ||||
| Compressive strength | 4 N/mm² | ||||
| Acoustic performance | |||||
| Data of sound sucking As | 0.05 | ||||
| Sound insulation coefficient According to ISO717-Rw | 23 | 25 | |||
| Thermal properties | |||||
| Thermal Conductivity λ( W/M²K) | 2.25 | 2.7 | |||
| Thermal resistance R(1/m) (m²k/w) | 0.0089 | 0.0093 | |||
| Heat transfer coefficient U(k) (w/m²k) | 5.59 | 5.575 | |||
Alumideas honeycomb panel has high strength and rigidity and lightweight, and beautiful visual decorative and long service life, so the application is extensive, such as curtain wall, car, hull, especially on the building, can withstand high wind pressure and extreme weather, meet the requirement of most of the architectural design, and also has the excellent smoothness. Common installation ways are as below:
Paikliin ang iyong cycle ng pag unlad ng produkto sa pamamagitan ng mga linggo (at minsan buwan) at makabuo ng sample ng panel at tapusin ang mga pagsubok sa kwalipikasyon sa loob ng ilang araw. Ang ilang mga sample ng aluminum veneer ay maaaring maipadala sa loob ng 3 mga araw.
Kasama sa bawat quote ang real time na pagpepresyo at pagsusuri ng disenyo. Sinusuri namin ang iyong 3D CAD at tumutulong na matukoy ang anumang mga tampok na maaaring maging hamon sa panahon ng proseso ng pagmamanupaktura, tulad ng multifaceted pagtitiklop ng mga espesyal na hugis plates at mataas na katumpakan ukit. Bukod pa rito, Ang aming koponan ng mga bihasang engineer ng application ay maaaring talakayin ang iyong natatanging disenyo, Suriin ang mga cost trade-off, at kahit na makatulong sa iyo na i optimize ang mga guhit ng aluminyo sheet at gumawa ng mga pagbabago sa disenyo sa pamamagitan ng aming mga serbisyo sa pagkonsulta sa disenyo.
Mayroon kaming kumpletong awtomatikong linya ng kagamitan sa pag spray, temperatura control pugon, LPG combustion system at German pretreatment technology. Ang ibabaw ay gawa sa mataas na kalidad na PVDF coating mula sa PPG, DNT, AKZO, NIPPON at iba pang mga sikat sa mundo PVDF patong tagagawa, na may isang malawak na hanay ng mga kulay at maaaring ipasadya sa anumang kulay sa iyong sample ng kulay
Alumideas ay may higit sa 60+ oversea project sa mahigit 30 bansa para sa higit sa 10 mga taon. Pamilyar sa aluminyo pader cladding disenyo at mga pamamaraan ng pag install sa iba't ibang mga bansa at magagawang upang magbigay ng propesyonal na payo, upang itaguyod ang mga proyekto ng customer sa engineering
Alumideas is a aluminum honeycomb panels manufacturer in China. Nagbibigay kami ng isang one stop na solusyon para sa iyong panloob at panlabas na pandekorasyon cladding proyekto. Humingi ng quote ngayon!
Makikipag ugnayan kami sa iyo sa loob ng 1 araw ng pagtatrabaho, paki pansin po sa email na may suffix "@www.alumideas.com".
You come with your aluminum panel project, our staff greet you with their smile and most importantly, their knowledge.
They can help you in these ways:
In the project, mga plato ng aluminyo (panels）need to be perfectly connected with other materials of the building. Gayunpaman, as the general engineering drawings involve too many materials, it is impossible to mark the installation and other information of each material in great detail, and the characteristics of each material are only be known by the corresponding supplier, so it is necessary for technicians to optimize the drawings.
The technicians will help in these ways:
Under EXW term, customer need to arrange freight transportation themselves; Under INCOTERMS such as FOB, C&F and CIF, logistics forwarder will be needed to take charge of all kinds of documents and deal with customs.
Our experienced logistics forwarders will help you in these ways:
After you communicate and get what you want to know from our staff, our professional sale will come to you and follow up your project.
He/She will help you in these ways:
Alumideas manufactures all aluminum panels in our own facilities, which are eco-friendly buildings. Alumideas highly takes environment protection in all working areas into consideration by decreasing waste in all production processes.
Accepting OEM and ODM, Alumideas will help you in these ways(based on the process of manufacturing):
The transaction does not end when the customer receives the goods; it’s just the beginning. Our sales will follow up the situation of products including their quality, quantity. And further, they will help to make plans for the sales of goods.
We promise to provide every customer with satisfactory aluminum plates and services. We also know that you may encounter an problem and need assistance. Friendly and courteous customer service experts will always be ready to provide timely solutions.
Araw ng Paggawa 2024 ay darating na! Panahon ito para pagnilayan ang makasaysayang kahalagahan ng paggawa, ang patuloy na ebolusyon ng propesyon, at ang tama
10 Pinakamahusay na Mga Kumpanya ng Facade ng Aluminyo Sa 2023 Panimula: Sa artikulong ito, Ipapakilala namin ang pinakamahusay na 10 aluminyo facade manufacturing kumpanya upang matugunan ang iyong konstruksiyon
Mga pagbati, Nais naming ipaalam sa inyo na ang aming tanggapan ay isasara mula Setyembre 29 hanggang Oktubre 6 para sa Pambansang Araw at Kalagitnaan ng Taglagas Festival
Kumuha ng isang instant quote mula sa aming mga propesyonal na consultant.
Makikipag ugnayan kami sa iyo sa loob ng 1 araw ng pagtatrabaho, paki pansin po sa email na may suffix "@alumideas.com".
Mabilis na Info Exchange Tumutulong sa Amin na Maglingkod sa Iyo Mas mahusay
