Aluminum composite panels offer a combination of strength, durability, lightweight, and flexibility, making them suitable for a wide range of applications in the construction industry. They are often used for exterior wall cladding, signage, interior decoration, and more.
Certifications
ISO 9001:2015 | SGS certificated | Critical to Quality Inspections
The aluminum composite panel is composed of two materials (metal and non-metal) with completely different properties. It not only retains the main characteristics of the original composition material (metal aluminum non-metal polyethylene plastic), but also overcomes the shortcomings of the two materials. It has many excellent material properties, such as weather resistance, corrosion resistance, impact resistance, fireproof, moisture-proof, sound insulation, heat insulation and shock resistance; easy to process and shape, easy to handle and install. Therefore, it is widely used in all kinds of architectural decoration.
Mirror composite panel
Office composite panel
Fireproof composite panel
Composite panel curtain wall
The temperature difference is very small as the oven is 30cm in height. Horizontal baking, the temperature at every point of the product is almost the same. Coating at horizontal level, no extra manual coating is needed.
Since the coating and surface are non-granular and non-porous, contaminants cannot penetrate the surface.
The plate is baked at high temperature, the internal stress of the plate is released, and the deformation of the plate surface can be processed and formed after mechanical flattening.
Because the surface is smooth, there is no pollution. Dust and other pollutants on the surface can be washed off by rainwater.
Roller coating is a pressure printing coating, the whole coating film and surface are non-granular and free of micropores.
Due to the pressure coating of the plate, the force on the plate surface is uniform. The coat thickness deviation is 0.5μ.
1. Aluminum composite panels for building curtain walls
The minimum thickness of the upper and lower aluminum plates shall not be less than 0.50mm, and the total thickness shall not be less than 4mm. The aluminum material should meet the requirements of GB/T 3880. Generally, 3000, 5000 series of aluminum alloy plates should be used, and the coating should be fluorocarbon resin coating.
2. Aluminum composite panels for exterior wall decoration and advertising
The upper and lower aluminum plates are made of rust-proof aluminum with a thickness of not less than 0.20mm, and the total thickness should not be less than 4mm. The coating generally adopts fluorocarbon coating or polyester coating.
3. Aluminum composite panels for indoor application
The upper and lower aluminum plates generally use aluminum plates with a thickness of 0.20mm, the minimum thickness is not less than 0.10mm, and the total thickness is generally 3mm. Coatings are polyester or acrylic.
The aluminum composite panel is composed of two materials (metal and non-metal) with completely different properties. It not only retains the main characteristics of the original composition material (metal aluminum non-metal polyethylene plastic), but also overcomes the shortcomings of the two materials. It has many excellent material properties, such as weather resistance, corrosion resistance, impact resistance, fireproof, moisture-proof, sound insulation, heat insulation, and shock resistance; easy to process and shape, and easy to handle and install. Therefore, it is widely used in all kinds of architectural decoration.
Aluminum-plastic panels can be cut, sawed, milled, punched, pressed, and bent with tools for processing wood or metal. It can be processed into various shapes according to the requirements of architectural decoration design, especially for arc, reverse arc, small radius fillet, inner and outer corners, and other shapes, which are incomparable with other decoration materials.
Ordinary aluminum products processing machinery and wood products processing machinery can be used for the processing of Alumideas composite panels without special equipment.
As a common material for building curtain wall, aluminum composite panel can be installed in different ways according to the shape of building exterior wall. The following are 5 common installation methods of aluminum composite panel:
Shorten your product development cycle by weeks (and sometimes months) and produce panel sample and finish qualification tests within days. Some aluminum veneer samples can be shipped within 3 days.
Each quote includes real-time pricing and design analysis.We evaluate your 3D CAD and help identify any features that may be challenging during the manufacturing process, such as multifaceted folding of special-shaped plates and high precision engraving.In addition, our team of experienced application engineers can discuss your unique design, evaluate cost trade-offs, and even help you optimize aluminum sheet drawings and make design changes through our consulting design services.
We have complete automatic spraying equipment line, temperature control furnace, LPG combustion system and German pretreatment technology. The surface is made of high-quality PVDF coating from PPG, DNT, AKZO, NIPPON and other world-famous PVDF coating manufacturers, with a wide range of colors and can be customized in any color with your color sample
Alumideas has over 60+ oversea project in more than 30 countries for more than 10 years. Familiar with aluminum wall cladding design and installation methods in different countries and able to give professional advice, so as to promote customer’s engineering projects
We help you avoid the pitfalls and provide you with durable and cost-effective solution on time and within budget.
Quick Info Exchange Helps Us Serve You Better
Get an instant quote from our professional consultants.
We will contact you within 1 working day, please pay attention to the email with the suffix “@alumideas.com”.
